|
Derginin Adı:
|
Mediterranean Journal of Modeling and Simulation
|
|
Cilt:
|
2017/1
|
|
Sayı:
|
1
|
|
Makale Başlık:
|
Quasi-static indentation modelling of aluminium specimen using finite element analysis
|
|
Makale Alternatif Dilde Başlık:
|
Alternatif dilde başlık bulunmamaktadır. There is no article title in another language.)
|
|
Makale Eklenme Tarihi:
|
19.03.2017
|
|
Okunma Sayısı:
|
1
|
|
Makale Özeti:
|
The influence of different types of rigid hemispherical and conical indenters on a rectangular specimen of aluminium has been investigated, in the small indenter test. A 3-D finite-element FE model was used to carry out the computation of the elastic-plastic solution of different rigid hemispherical and conical indenters. Three hemispherical-headed and four conical-headed indenters were designed and developed for testing. FE software ABAQUS® has been used to determine the load vs. indenter-displacement curves, reaction forces, deformation contours and Von-Mises stresses. The FE model was validated by comparing the results with the experimental data received from the Hertz Contact Theory and was found to be in reasonably good agreement.
|
|
Alternatif Dilde Özet:
|
Alternatif dilde abstract bulunmamaktadır. (There is no abstract in another language.)
|